Trusted External Rendering Services From Yorkshire
Customer Support & Sales
07716 367657
Customer Support & Sales
07716 367657
Contact Hours
Mon - Sat : 08:00 - 18:00

News

Yorkshire Rendering Specialists > News
EWI Rendering

Tired of High Heating Bills? EWI Could Be Your Best Move Yet!

September 15, 20250

Tired of High Heating Bills? EWI Could Be Your Best Move Yet!

You know how it goes — as soon as October hits in Yorkshire, the heating’s on, and it doesn’t go off until April. Then the gas bill lands and suddenly everyone’s wearing jumpers indoors.

If you’ve been wondering how to keep your house warmer without cranking up the thermostat, EWI rendering might be the answer.

Why EWI works:
When you insulate the outside walls of your home, you stop a lot of the heat from escaping. Think of it like popping a thermal flask around your house. It keeps the warm air in and the cold air out — simple as that.

The benefits are pretty solid:

  • You’ll likely use less energy to heat your home.
  • Bills could drop by a noticeable amount over time.
  • It helps in summer too, by keeping your home cooler.
  • Your house will feel more comfortable, all year round.

Curious what it would cost for your place?
Reach out on 07960 229 185 or email us at [email protected] — we can give you a rough idea and talk you through the process, no obligation.

See our completed work here…

EWI Rendering

Thinking About EWI Rendering for Your Yorkshire Home?

August 24, 20250

Thinking About EWI Rendering for Your Yorkshire Home? Here’s What You Need to Know

Let’s be honest — Yorkshire weather isn’t always kind to our homes. Between the wind, the rain, and the chill in the air, our walls do a lot of work. That’s where EWI rendering comes in. It might sound a bit technical, but it’s actually a pretty straightforward (and smart) upgrade for your home.

EWI rendering – what is it?
EWI stands for External Wall Insulation. Basically, it’s like giving your house a nice warm coat. A layer of insulation is fixed to the outside of your walls, then it’s covered with a protective render — the stuff that gives it that clean, finished look.

Why bother with it?

  • Cosier winters – Your home holds onto heat better.
  • Lower energy bills – Less heat escaping = less heating needed.
  • Fresh new look – The render comes in loads of finishes and colours.
  • Weather protection – Helps keep out damp and rain.

Whether you’re in a cottage in Harrogate or a semi in Selby, EWI can make a big difference. And it’s not just for old homes either — even newer properties benefit.

Want to chat about your options?
Give us a ring on 07960 229 185 or drop us an email at [email protected]. We’re happy to answer any questions, no pressure — just solid advice from folks who know Yorkshire homes inside and out.

See our gallery for completed projects here.

Thin-Coat Rendering

What to Know About Thin-Coat Rendering in York

July 24, 20250

What to Know About Thin-Coat Rendering in York

If you’re based in York or anywhere across Yorkshire, you’ve probably noticed more and more homes getting a clean, smooth finish on the outside. That’s often thanks to thin-coat rendering—a modern alternative to traditional sand and cement systems. Whether your home’s showing its age or you’re simply after less maintenance, here’s what you need to know.

What Is Thin-Coat Rendering?

Thin-coat render is a breathable, flexible render system designed to move with your property and withstand harsh weather. It includes a reinforced base layer with mesh, topped with a pre-coloured finish coat that doesn’t require painting. The final look is sharp, consistent, and designed to last for years.

Why Thin It Suits Homes in York and Yorkshire
Our local climate can throw a lot at exterior walls—wind-driven rain, frost, sudden temperature swings. Thin-coat rendering is made to deal with just that:
• Water-repellent yet breathable
• Crack-resistant thanks to its flexible mesh base
• Low maintenance—no peeling paint or patch repairs
• Customisable finishes for both modern and period homes

A Few Things to Ask Before You Book in your Rendering 

Not all rendering jobs are the same. Before hiring anyone, you’ll want to ask:
• Is the wall surface sound and ready for rendering?
• Are they embedding proper fibreglass mesh in the base layer?
• Do they schedule work around dry, moderate weather?
• Can they show recent work around York?

Thinking of refreshing your home’s exterior?
Whether you’re just curious or ready to move forward, you can speak directly with our team at 07960 229 185, or if email suits you better, drop us a line at [email protected]. We’re happy to talk through the process and help you decide what’s right for your home.

You can also check out past work and more information on our gallery.

Lime Rendering

What is the lifespan of a lime render?

November 1, 20230

The lifespan of lime render can vary depending on several factors including the quality of materials used, the application method, environmental conditions, and maintenance practices. However, properly applied and maintained lime render can have a lifespan of up to 25-30 years or even longer in some cases.

Here are some factors that can influence the lifespan of lime render:

  1. Quality of Materials: Using high-quality lime and aggregates in the rendering mix can contribute to the longevity of the render. Inferior materials may degrade more quickly over time.
  2. Application Method: Proper application techniques, including thorough preparation of the substrate and correct mixing and application of the render, are essential for maximizing the lifespan of lime render.
  3. Environmental Conditions: Exposure to harsh weather conditions such as heavy rain, freezing temperatures, and prolonged exposure to sunlight can affect the durability of lime render. In areas with extreme weather, additional protective measures such as overhangs or periodic maintenance may be necessary to prolong the lifespan of the render.
  4. Maintenance: Regular maintenance, such as cleaning and repointing, can help preserve the integrity of the lime render and prevent deterioration. Prompt repairs of any cracks or damage can also extend the lifespan of the render.
  5. Building Design: The design of the building, including factors such as ventilation and moisture management, can impact the performance of lime render. Properly designed buildings with adequate ventilation and moisture control measures are less likely to experience problems such as dampness or mold growth, which can affect the durability of the render.

Overall, while lime render can be long-lasting when properly applied and maintained, it’s essential to consider these factors to ensure the best possible lifespan for your render. Regular inspections and maintenance can help identify and address any issues early, preserving the integrity of the render and extending its lifespan.